Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 203 of 545 2020-04-15
Name
Type
Default
Description
<cmdDetails>
integer
N/A
identifies the command details
Values:
0
:
set up call, but only if not currently busy on another
call
1
:
set up call, but only if not currently busy on another
call, with redial
2
:
set up call, putting all other calls (if any) on hold
3
:
set up call, putting all other calls (if any) on hold, with
redial
4
:
set up call, disconnecting all other calls (if any)
5
:
set up call, disconnecting all other calls (if any), with
redial
<confirmationText>
string
-
string for user confirmation stage
<calledNumber>
string
-
string containing called numbers
This section is dedicated to the following proactive commands:
<cmdType>=17 (SEND SS)
<cmdType>=18 (SEND USSD)
<cmdType>=19 (SEND SHORT MESSAGE)
<cmdType>=20 (SEND DTMF)
<cmdType>=32 (PLAY TONE)
#STGI response format:
#STGI: <cmdType>[,<alphaIdentifier>]
Name
Type
Default
Description
<alphaIdentifier>
string
-
optional text provided by the SIM/USIM device
in ASCII format
<cmdType>=33 (DISPLAY TEXT proactive command)
#STGI response format:
#STGI: 33,<cmdDetails>[,<text>]
Name
Type
Default
Description
<cmdDetails>
hex
N/A
a bit mask where each bit position, according to
its value, has a specific meaning:
bit 0:
0 - normal priority
1 - high priority
bits 1-6:
reserved for future use
bit 7:
0 - clear message after a delay
1 - wait for user to clear message
Value:
0x00÷0xFF
:
mask

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English