Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 210 of 545 2020-04-15
- "0079" or "0059" (positive answer) and "006E" or "004E" (negative answer)
for UCS2 alphabet
The ongoing proactive command to require a binary choice sets bit 2 of the
<cmdDetails> parameter to 1, see #STGI command.
• <cmdType>=35 (GET INPUT proactive command).
<data> contains the string of characters entered by the user.
• <cmdType>=36 (SELECT ITEM proactive command).
<data> contains the item identifier selected by the user.
<userAction>=0 is used, for example, to
• accept a call when the ongoing proactive command is SET UP CALL,
<cmdType>=16
• start a connection when the ongoing proactive command is OPEN CHANNEL,
<cmdType>=64
Use of icons is not supported. All icon related actions will respond with no icon available.
AT#STSR?
The read command returns the ongoing proactive command and the SAT/USAT interface state.
The format message is:
#STSR: <state>,<cmdType>
If there is no ongoing proactive command, an ERROR message is returned.
Additional info:
Returned parameters.
Name
Type
Default
Description
<state>
integer
-
state of the sending of the SET UP MENU proactive
command (37), refer to AT#STIA? command
<cmdType>
integer
-
proactive command code, refer to #STGI command
to have information on the <cmdType>
AT#STSR=?
The test command returns the range for the parameters <state> and <cmdType>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English