Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 238 of 545 2020-04-15
<oa>
string
-
Originator address, represented in the currently
selected character set (see +CSCS).
<da>
string
-
Destination address, represented in the currently
selected character set (see +CSCS).
<alpha>
string
-
The alphanumeric representation of <da> or <oa>,
corresponding to an entry found in the phonebook;
used character set is the one selected with command
+CSCS.
<sca>
string
-
Service Centre Address
<tooa>
integer
N/A
type of number of <oa>
Values:
129
:
number in national format
145
:
number in international format (contains the "+")
<toda>
integer
N/A
type of number of <da>
Values:
129
:
number in national format
145
:
number in international format (contains the "+")
<tosca>
integer
N/A
type of number of <sca>
Values:
129
:
number in national format
145
:
number in international format (contains the "+")
<length>
integer
-
text length
<data>
string
-
TP-User-Data
If <dcs> indicates that 3GPP TS 23.038 default
alphabet is used, each character of GSM alphabet will
be converted into current TE character set (see
+CSCS)
If <dcs> indicates that 8-bit data coding scheme is
used, each 8-bit octet will be converted into two IRA
character long hexadecimal number (e.g. octet 0x2A
will be converted as two characters 0x32 0x41)
In both cases (in PDU or Text mode) if status of the message is 'received unread', status
in the storage changes to 'received read'.
AT+CMGR=?
Test command returns the OK result code

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English