Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 330 of 545 2020-04-15
Value:
0
:
dummy value
Additional info:
<mode>=1
The jamming condition is reported on pin GPIO_02 (JDR):
• GPIO_02 (JDR) = Low, Normal Operating Condition
• GPIO_02 (JDR) = High, Jammed Condition
To have information on GPIO_02 pin, refer to document [1]. GPIO_02 pin can be used also
by other functionality, see #GPIO command.
<mode>=2
the jamming condition is reported with a single URC on serial line, in the format:
#JDR: <status>
Unsolicited field:
Name
Type
Description
<status>
string
jamming condition status, <mode>=2
Values:
JAMMED RAT
:
jamming condition detected, <RAT> is the
Radio Access Technology for operates: GSM
or LTE.
OPERATIVE RAT
:
Normal Operating condition restored. Status
shown only after a jamming condition has
occurred.
AT#JDRENH2?
Read command reports the current parameters values, in the format:
#JDRENH2:<mode>,<sat2G>,0,<carrNum2G>,<pRxLevT2G>,0,0,0,<P_RSSI_T4G>,
<P_RSRQ_T4G>,0
AT#JDRENH2=?
Test command reports the supported range of the parameters values.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English