Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 360 of 545 2020-04-15
Name
Type
Description
<ip_address>
string
local IP address obtained from the network.
The URC presentation mode <urcmode> is related to the current AT instance only. Last
<urcmode> setting is saved for every instance as extended profile parameter, thus it is
possible to restore it even if the multiplexer control channel is released and set up, back
and forth.
< retry > and <delay> setting are global parameters saved in NVM.
If the automatic activation is enabled on a context, then it is not allowed to modify by the
command #SCFG the association between the context itself and the socket connection
identifier; all the other parameters of command #SCFG are modifiable while the socket is
not connected.
AT#SGACTCFG?
Read command reports the states of all configured PDP contexts, in the format:
#SGACTCFG: <cid
1
>,<retry
1
>,<delay
1
>, < urcmode >CR><LF>
...
#SGACTCFG: <cid
n
>,<retry
n
>,<delay
n
>,< urcmode >
AT#SGACTCFG=?
Test command reports the values ranges of the parameters.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English