Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 386 of 545 2020-04-15
AT#SSENDEXT=?
Test command returns the range of supported values for parameters <connId>, <bytesToSend>
and <Rai>.
Open the socket in command mode:
AT#SD=1,0,<port>,"IP address",0,0,1
OK
Enter the command specifying total number of bytes as second parameter:
AT#SSENDEXT=1,256
> .............................. ; Terminal echo of bytes sent is displayed here
OK
All possible bytes (from 0x00 to 0xFF) are sent on the socket as generic bytes.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English