Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 464 of 545 2020-04-15
0xC030 : TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
0xC031 : TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
0xC032 : TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
0xC09C : TLS_RSA_WITH_AES_128_CCM
0xC09D : TLS_RSA_WITH_AES_256_CCM
0xC09E : TLS_DHE_RSA_WITH_AES_128_CCM
0xC09F : TLS_DHE_RSA_WITH_AES_256_CCM
0xC0A0 : TLS_RSA_WITH_AES_128_CCM_8
0xC0A1 : TLS_RSA_WITH_AES_256_CCM_8
0xC0A2 : TLS_DHE_RSA_WITH_AES_128_CCM_8
0xC0A3 : TLS_DHE_RSA_WITH_AES_256_CCM_8
0xCCA8 : TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
0xCCA9 : TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
0xCCAA : TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256
Server CA certificate must be stored through #SSLSECDATA.
Setting an obsolete cipher suite have the same effect as setting it to 0.
If secure socket is not enabled using #SSLEN command, only test command can be
used.
AT#SSLSECCFG?
Read command reports the currently selected parameters in the format:
#SSLSECCFG: <SSId>,<CipherSuite>,<auth_mode>
Read command returns ERROR if secure socket has not been enabled using #SSLEN command.
AT#SSLSECCFG=?
Test command returns the range of supported values for all the parameters.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English