Telit Wireless Solutions ML865G1 At Commands Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev.4 Page 539 of 545 2020-04-15
and the value range, see the GPRS Timer 3 IE
in 3GPP TS 24.008.
<ReqActiveTime>
string
-
one byte in an 8 bit format. Requested Active
Time value (T3324) to be allocated to the UE.
The requested Active Time value is coded as
one byte (octet 3) of the GPRS Timer 2
information element coded as bit format (e.g.
"00100100" equals 4 minutes). For the coding
and the value range, see the GPRS Timer 2 IE
in 3GPP TS 24.008.
A special form of the command can be given as AT+CPSMS= (with all parameters omitted).
In this form, the parameter <mode> will be set to 0, the use of PSM will be disabled and data
for all parameters in command +CPSMS will be removed or, if available, set to the
manufacturer specific default values.
CPSMS configuration is saved in the file system
AT+CPSMS?
Read command returns the current CPSMS configuration, in the format:
+CPSMS:<mode>,[<ReqPeriodicRAU>],[<ReqGPRSreadyTimer>],[<ReqPeriodicTAU>],
[<ReqActiveTime>]
AT+CPSMS=?
Test command reports the range for the parameters in the format:
+CPSMS:(list of supported <mode>s),(list of supported <ReqPeriodicRAU>s),(list of supported
<ReqGPRSreadyTimer>s),(list of supported <ReqPeriodicTAU>s),(list of supported
<ReqActiveTime>s)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English