FLIGHT PHASES
4 TAKE-OFF
3.2. STANDARD TAKE-OFF
T/O with NAV mode ARM
NAV mode armed for take-off is the
default mode as per A/C design.
This chapter describes the normal
operations and displays during take-off.
It is assumed for the following
description:
− PERF page is completed,
− FMS Route is available after take-off
and NAV mode will be used after take-
off.
TAKE-OFF THRUST............. Set
Set take-off thrust as appropriate
FMA...............................Check
Check appropriate mode
selection
RWY mode appears on FMA if an
ILS is tuned for the selected
departure runway. Otherwise no
lateral mode comes up until the
aircraft is airborne. If altitude
selected on the FCU is at or
below the ACC ALT, ALT (blue)
will be displayed instead of CLB.
ND.................................Check
The aircraft symbol must be
centered on the runway
threshold on the ND.
MAN
FLX 55
RWY
NAV
1FD2
A/THR
SRS
CLB
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321
To Next Page
Loading...