MULTIPHASE PROCEDURES
12 ENGINE-OUT
8.7. GO-AROUND
If an engine failure
occurs when FMGS is in
GO AROUND phase, the
EO mode is activated
MCDUs switch to the
PERF GO AROUND page automatically.
Proceed according to OPS procedures for Standard or Obstacle
strategy.
Contrary to EO take-off, no specific EO Go-Around procedure is
provided in NAV data base. ND displays the normal Go-Around
procedure, if F-PLN is correctly sequenced.
PERF page
− EO CLR* [1R] is displayed,
− ENG OUT ACC [5R] altitude is
displayed.
MAN
TOGA
GA TRK
AP1+2
1FD2
A/THR
SRS
CLB
%
GO AROUND
FLP RETR EO
F=138 CLR*
SLT RETR
S=176
CLEAN
O=196
THR RED/ACC ENG OUT ACC
1580/1580 1580
ACTIVATE NEXT
{APPR PHASE PHASE>
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321
To Next Page
Loading...