MULTIPHASE
LATERAL F-PLN management
69
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00
ENABLE ALTN function
This function is used to initiate a
diversion provided an ALTN has been
defined.
The ENABLE ALTN function is
accessed from F-PLN pages A or B
via LAT REV at any WPT (except
pseudo-WPTs).
Ex: “Cleared to divert to EHAM, from
DIMAL direct CLN, UL620 to REDFA”
LAT REV......................... Press
Select LAT REV at appropriate WPT,
in this example, at DIMAL.
LAT REV page at selected WPT is
displayed, showing ENABLE ALTN
prompt at [4L].
FROM THV001 {}
UTC SPD/ALT
T-P 1635 / FL360
BRG010° 6
(T/D) 1703 .79/ FL360
TRK010° 17
DIMAL 1705 " / FL308
7
ALESO 1706 293/ FL286
BIG3B 42NM
TIGER 1712 " /*FL154
DEST UTC DIST EFOB
EGLL27R 1725 115 3.8
£$
LAT REV FROM DIMAL
50°29.6N/001°22.0E
NEXT WPT
<HOLD [ ]
ENABLE NEW DEST
{ALTN [ ]
AIRWAYS>
<RETURN
To Next Page
Loading...