Thales FMGS - Dir to Radial out

MULTIPHASE
LATERAL F-PLN management 37
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00
 DIR TO RADIAL OUT
This function is used to follow a radial
out from a desired WPT.
DIR key ......................... Press
Select or enter specified WPT.
In the example CGC is entered in
[1L].
TMPY DIR TO page is displayed.
Required RADIAL OUT ....Enter
Insert desired outbound radial from
the specified WPT;
Ex: radial 045° from CGC.
On ND, the selected RADIAL OUT is
shown (dashed yellow) from this
WPT.
RAD OUT entry may be modified
before insertion; it cannot be cleared,
except by using DIR TO ERASE
prompt [6L].
DIR TO
WAYPOINT UTC DIST
[ ] ---- ---
F-PLN WPTS
{BOKNO DIRECT TO
WITH
{DEVRO ABEAM PTS
RADIAL IN
{VANAD [ ]°
RADIAL OUT
{VADOM [ ]°
CGC £$
DIR TO
WAYPOINT UTC DIST
CGC 1540 44
F-PLN WPTS
{BOKNO DIRECT TO }
WITH
{DEVRO ABEAM PTS
RADIAL IN
{VANAD [ ]°
RADIAL OUT
{VADOM [ ]°
DIR TO DIR TO
{ERASE INSERT*
45 £$
DIR TO
WAYPOINT UTC DIST
CGC 1540 44
F-PLN WPTS
{BOKNO DIRECT TO }
WITH
{DEVRO ABEAM PTS
RADIAL IN
{VANAD [ ]°
RADIAL OUT
{VADOM 045°
DIR TO DIR TO
{ERASE INSERT*
£$