MULTIPHASE
LATERAL F-PLN management
57
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00
3.5. OFFSET function
General
The OFFSET function enables to fly parallel to the original ACTIVE
F-PLN, laterally offset by a given distance and direction (entered by the
pilot).
OFFSET function is accessed via LAT REV on F-PLN page at the FROM
WPT.
LAT REV [1L]................. Press
OFFSET [2L] ................. Press
OFFSET page at PPOS is displayed.
OFFSET function is not available if
FROM–TO leg is an approach leg, or a
leg for which a vertical gradient is
specified, or a leg for which the
course change is more than 135°.
The offset ends by default at the last
consecutive "offsetable" waypoint.
OFFSET range is 1 to 50 NM.
FROM THV001 {}
UTC SPD/ALT
VADOM 1549 / FL360
UN874 BRG021° 18
BAMES 1553 .80/ FL360
UT191 TRK012° 17
PODEM 1555 " / "
49
(T/D) 1602 .80/ FL360
UT191 3NM
ABUDA 1602 " / FL355
DEST UTC DIST EFOB
EGLL27R 1625 208 4.0
£$
LAT REV FROM PPOS
48°33.0N/001°16.2E
<OFFSET
<HOLD
<RETURN
OFFSET FROM PPOS
OFFSET
[ ]
<RETURN
To Next Page
Loading...