MULTI PHASE
8 NAVIGATION management & monitoring
RUNWAY [3L]
Enables display of runway definition
data as contained in NAV database or
pilot-stored RWY list.
From DATA page 2/2:
RUNWAY [3L] .........Press
Navaid page is displayed with amber
boxes In [1L].
IDENT [1L].............. Enter
ARPTNNS format must be used where:
- ARPT is the ICAO airport identifier.
- NN are two digits 01-36,
- S is either a blank or an L, R or C.
If an undefined 2 digits RWY number
with a known ARPT identifier is
entered, unless that ARPT has been
defined by NEW RUNWAY function,
"NOT ALLOWED" s-pad msg (white) is
triggered.
LAT/LONG [2L]: displays LAT/LONG of t
he RWY threshold point.
ENGTHL
RUNWAY
IDENT
_______
EGLL27R
RUNWAY
IDENT ILS IDENT
EGLL27R IRR
LAT/LONG
5128.7N/00026.0W
LENGTH
3902M
ELV
78
CRS
273°
[4L]: displays RWY length followed by the unit (M for meters
LV
and FT for feet) as selected in OPC file.
E [5L]: displays threshold elevation in feet to the nearest 10 feet.
RS
C [6L]: displays RWY course.
S IDENT
L [1R]: if RWY is associated with a LOC, ILS or MLS, otherwise
MLS facilities are available for the RWY, ILS ident has
ntry of an unknown ARPT in [1L] causes NEW RUNWAY page to be
field is blank.
If both ILS and
precedence over MLS.
E
displayed with the ident inserted.
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321
To Next Page
Loading...