Thales FMGS - Map Shift; Other Information; Position Update; TAKE-OFF with no V2 Entry

FLIGHT PHASES
TAKE-OFF 9
 TAKE-OFF with no V2 entry
If V2 is not inserted in the PERF TAKE-OFF page of the MCDU, the SRS
mode will not be available after take-off, V/S mode engages and the
current speed becomes the speed target.
Refer to Operator’s Manual for associated procedure.
V/S+XXXX
NAV
3.4. OTHER INFORMATION
 Position update
Aircraft with no GPS
An automatic position update at runway threshold is performed when
the thrust levers are set in the take-off position.
If a take-off shift is entered in the PERF TAKE-OFF page, the FMGC
position is updated to the coordinates of the take-off shift.
Aircraft with GPS
No position update occurs when the thrust levers are set to the FLEX or
TOGA detent.
 MAP SHIFT
See Part III: Ch 7.3 - Position monitoring
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00