Thales FMGS - Flight Plan Init Request; INIT REQUEST from INIT a Page

MULTIPHASE
6 DATA LINK
 FLIGHT PLAN INIT REQUEST

INIT REQUEST from INIT A page
The flight plan initialization request may be made by pressing INIT
REQUEST prompt on INIT A page before engine start, provided no
ACTIVE or TMPY F-PLN exists.
INIT key.........................Press
INIT REQUEST may be initiated with
CO RTE or FROM/TO or FLT NBR fields
filled.
INIT {}
CO RTE FROM/TO
__________ ____/____
ALTN/CO RTE INIT
----/---------- REQUEST*
FLT NBR
________
LAT LONG
----.-- -----.--
COST INDEX
--- WIND>
CRZ FL/TEMP TROPO
----- /---° 36090
TLSLHR01
INIT {}
CO RTE FROM/TO
TLSLHR01 ____/____
ALTN/CO RTE INIT
----/---------- REQUEST*
FLT NBR
________
LAT LONG
----.-- -----.--
COST INDEX
--- WIND>
CRZ FL/TEMP TROPO
----- /---° 36090
NOT IN DATA BASE
INIT {}
CO RTE FROM/TO
TLSLHR01 ____/____
ALTN/CO RTE INIT
----/---------- REQUEST
FLT NBR
________
LAT LONG
----.-- -----.--
COST INDEX
--- WIND>
CRZ FL/TEMP TROPO
----- /---° 36090
 INIT REQUEST initiated by
CO RTE:
CO RTE [1L] ...................Enter
If CO RTE exists in NAVdb, MCDU
displays the ROUTE SELECTION
page(s) and the INIT REQUEST
prompt is removed from the INIT A
page.
INIT REQUEST [2R]........Press
Amber (*) symbol disappears during
Data Link transmission of the
request.
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321