Thales FMGS - Performance Data Report

To Next Page

To Previous Page

MULTIPHASE

DATA LINK 45

 Performance data report

The Performance Data Report downlink message enables transmission

of Performance data (GW, CG, CRZ ALT, FUEL data) from the ACTIVE

F-PLN to the ground.

This message is sent automatically in response to a ground request.

AOC function is enabled.

It cannot be sent manually.

9.6. DATA LINK SCRATCHPAD MESSAGES

In addition to the scratchpad messages described in chapters

5.2/5.3/5.4, the following error messages may be triggered:

FM DATALINK UNAVAIL

This message is displayed when the ACARS buses are not ready for

communication.

NOT XMITTED TO ACARS

This message is displayed when the crew manually sends a downlink

message (request or report) through a MCDU page and the

communication protocol fails during the data transfer (communication

not established or not acknowledged).

When displayed, MCDU reverts to the page displayed before the

downlink initiation.

This message is cleared when the user re-sends a downlink message,

whether it is the same message or not.

AIRBUS A318/319/320/321

J43126AA 00