MULTIPHASE
LATERAL F-PLN management
11
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00
In this example AIRWAYS function is used to enter a F-PLN revision
following a route change: after FOUCO proceed UT209 to TUDRA then
UT158 to AMB, then UN859 to VANAD.
Proceed as follows:
Lat REV at FOUCO .......... Press
AIRWAYS [5R] ..................Press
VIA UT209 [1L] ................Enter
TO TUDRA [1R] ................Enter
TMPY F-PLN [6L] ...............Press
Then, enter following AWYs successively as above.
At TUDRA UT158 to AMB, at AMB UN859 to VANAD.
ND ................................Check
If correct.
TMPY INSERT [6R] ....... Press
AIRWAYS FROM FOUCO
VIA TO
UT209 TUDRA
TMPY
<F-PLN
TMPY THV001 {}
UT209 UTC SPD/ALT
TUDRA 1522 .79/ FL360
UT158 29
BEVOL 1526 " / "
UT158 TRK015° 26
AMB 1529 " / "
UN859 25
VANAD 1533 " / "
45NM
VADOM 1543 " / "
ONCE THEN TMPY
{UNDO/ERASE INSERT*
£$
To Next Page
Loading...