MULTI PHASE
NAVIGATION management & monitoring 33
In PREFLIGHT or TAKE OFF phase.
If the take off runway associated with an ILS has been selected, the
entry is compared with it:
− If they are same, no message is displayed, the LOC bearing of the
entered ILS is auto-tuned and displayed in [4L], with logic "F" or "B",
− If they are not same, "RWY/LS MISMATCH" s-pad msg (amber) is
triggered, the LOC bearing of the entered ILS is auto-tuned and
displayed in [4L], with logic "F" or "B".
If the take off runway associated with a MLS has been selected,
"RWY/LS MISMATCH" s-pad msg (amber) is triggered, the LOC bearing
of the entered ILS is auto-tuned and displayed in [4L], with logic "F" or
"B".
If no LS (ILS or MLS) has been selected at the departure runway, no
message is displayed, the LOC bearing of the entered ILS is auto-tuned
and displayed in [4L], with logic "F" or "B".
AIRBUS A318/319/320/321
© THALES AVIONICS S.A.
J43126AA 00
To Next Page
Loading...