Thales FMGS - Page 522

MULTIPHASE
8 DATA LINK
 INIT REQUEST from SEC INIT page
The flight plan initialization may also be made through SEC INIT page,
by pressing INIT REQUEST prompt at any time whether or not an
ACTIVE or a TMPY F-PLN exists.
SEC F-PLN key................Press
 If INIT [1R] is not displayed:
This indicates that SEC F-PLN has
been created by COPY ACTIVE.
To use INIT REQUEST function,
the existing SEC F-PLN must be
deleted.
DELETE SEC [3L] ............Press
INIT prompt is then displayed in
[1R] field.
INIT [1R] ......................Press
Init REQUEST may be initiated:
 With CO RTE or FLT NBR
In this case,
[1L] or [2L] field .... Complete
Complete as desired.
INIT REQUEST [2R]........Press
 Directly by pressing INIT
REQUEST prompt.
INIT REQUEST [2R]........Press
Flight plan initialization and
performance REQUEST are sent
to ground station.
Amber (*) symbol disappears
during Data Link transmission of
the request.
SEC INDEX
{COPY ACTIVE INIT>
<SEC F-PLN
SEC F-PLN
PRINT
SEC INIT {}
CO RTE FROM/TO
[ ] [ ]/[ ]
ALTN/CO RTE INIT
---/---------- REQUEST*
FLT NBR
[ ]
LAT LONG
----.-- -----.--
COST INDEX
--- WIND>
CRZ FL/TEMP TROPO
----- /---° 36090
SEC INIT {}
CO RTE FROM/TO
TLSLHR01 [ ]/[ ]
ALTN/CO RTE INIT
---/---------- REQUEST*
FLT NBR
[ ]
LAT LONG
-----.-- -----.-
EX COST IND
--- WIND>
CRZ FL/TEMP TROPO
36090 ----- /---°
SEC INIT {}
CO RTE FROM/TO
[ ] [ ]/[ ]
ALTN/CO RTE INIT
---/---------- REQUEST*
FLT NBR
THV001
LAT LONG
----.-- -----.--
COST INDEX
--- WIND>
CRZ FL/TEMP TROPO
----- /---° 36090
SEC INDEX
{COPY ACTIVE
<SEC F-PLN PERF>
{DELETE SEC
*ACTIVATE SEC
SEC F-PLN
PRINT*
J43126AA 00
© THALES AVIONICS S.A.
AIRBUS A318/319/320/321