Topcon 3D OCT-1 User Manual

166
COMPARING ANALYSIS RESULTS
5. COMPARING ANALYSIS RESULTS
5.1. Types of Comparison
You can compare the results obtained by a variety of analysis.
• Both eyes display:
Displays the right and left eyes data of the same analysis mode.
• Comparison:
Displays the one eye data of the same analysis mode. ("One eye data" means "Comparison
between two data of the left eye or the right eye".)
• Comparison: Advanced:
Displays the 3D-scan one eye data.
•3D Mosaic:
Displays the image by using three or more 3D tomogram data or two or more 3D scan data with dif-
ferent fixation targets (macula, optic disc and center).
For the anterior segment image, "Comparison: Advanced" cannot be displayed.
You cannot compare two data which have different analysis mode.
When the data for "Comparison" or "Both eyes display" are not analyzed with the same analysis
module, the Normative data is not displayed. If both of the data are reanalyzed with the software
of this version, the Normative data can be displayed for "Comparison" or "Both eyes display".
5.2. Both Eyes Display
5.2.1. Selection of both eyes from the OCT data list
1 Select the right and left eye data of the same analysis mode from the OCT data list and press the
button.

Topcon 3D OCT-1 Specifications

General

Brand	Topcon
Model	3D OCT-1
Category	Medical Equipment
Language	English