62
CAPTURING TOMOGRAMS
2.8. Saving and Deleting Captured Tomograms
2.8.1. To Save a Tomogram
1 After imaging and overlapping, the captured tomogram is automatically saved.
The saved thumbnail is marked with "S".
2 Then, analysis is automatically done. After analysis, the thumbnail is marked with "P".
2.8.2. To Delete a Tomogram:
1 Highlight the thumbnail. You can select two or more thumbnails at this time.
2 Click Delete in the Thumbnail View panel.
3 Click OK to confirm the deletion.
CAUTION
Sometimes the analysis function is not normally finished. In this case,
the thumbnail is marked with "Fail".
To Next Page
Loading...
Need help?
General
