10
User maintenance
To ensure the safety and performance of this software, all maintenance works, unless specified in this
manual, shall be conducted by trained service engineers. The following maintenance task may be done
by the user. For details, refer to the relevant part of this manual.
• Archive and Back Up (Refer to P.197 in this manual.)
Environment for Operation
CAUTION
The necessary capacity of memory and hard disk are changed depend-
ing on the CPU in the personal computer or environment.
CAUTION
If the number of "Thread" in CPU is beyond 4, the processing may be
delayed. Reduce the number of "Thread" to use this software.
CAUTION
To operate the 3D OCT software normally, you must log on OS (Operat-
ing System) with Administrator's authority. If you log on OS with others
except Administrator's authority, you may not save the photography
data.
Item Operation spec. Recommended spec.
PC IBM PC/AT compatible machine
OS Windows 7 Professional 64bit
CPU Core2 DUO Core i7 (equivalent to 2600)
Clock 3GHz 3.4GHz
Core - 4
RAM 4GB 8GB
Hard disk At least 500GB (At least 7200RPM)
Drive (for installation/
backup of data)
DVD-Multi drive
Display SXGA (1280×1024) and 32-bit color WSXGA+ (1680×1050) and 32-bit color
Graphics board VRAM of 256MB with OpenGL capability VRAM of 512MB with OpenGL capability
Network card On-board LAN (to connect with LAN)
Expansion LAN card (applicable to PCI
Express Gigabit: for connecting OCT)
Expansion slot At least one free slot of PCI Express ×1
(for increasing the network card)
Database Microsoft SQL Server 2005
(SP2 or higher)
Microsoft SQL Server 2008 (SP1 or higher)
Microsoft SQL Server 2008 R2
When using Express Edition, it does not
operate correctly if the system manages an
enormous amount of patients/photo-
graphed data. In this case, please use
Standard Edition, etc.
To Next Page
Loading...
Need help?
General
