Topcon 3D OCT-1 - 7 Macro Function; When the Analysis Has Failed, It Is Probable that the Instrument DID Not Take

190
MACRO FUNCTION
7. MACRO FUNCTION
When the user clicks [Analyze] icon on the Data list, it initiates the Batch Processing Macro Function
which analyzes the scan data automatically in the background. Once the Macro process has started, the
[3D OCT Batch Processing] icon is displayed in the system tray at the lower right on the screen.
To view the progress, double-click the icon . The following dialog box is displayed.
(The data saved at photographing is automatically processed by the Macro function.)
For the button function, refer to the following "Button function list".
The icon is displayed except the period of analysis. Double-click this icon, and the following
dialog box is displayed.
[Button function list]
CAUTION
When the analysis has failed, it is probable that the instrument did not
take a picture correctly. It is possible that the analysis will be successful
if the instrument takes a picture again.
Button Function
Finishes the image analysis.
Deletes the analysis log.