27
CAPTURING TOMOGRAMS
4 Click [Register].
Be sure to enter the ID. Enter other information of the patient according to the need.
When the patient ID does not fill in all the blanks of the specified digits, the blank digit is
automatically filled with "0". You can set On/Off of this function on the "Option" screen of
"OCTset".
To access the "Option" screen, select [Start] [all programs] [TOPCON] [3D OCT]
[OCTset] and start "OCT-Configurtion". Then, set On/Off as mentioned above.
CAUTION
When the photography data is displayed, "Normative Data" is displayed
according to the patient's age at the photography date. However, it is
limited as mentioned below.
• When the patient is under 19, "Normative Data" for the age of 20 is
displayed as reference.
• When the patient is over 81 years old, "Normative Data" for the age of
80 is displayed as reference.