TP-Link T2500G-10TS - Ip Dhcp Snooping Information Remote-ID

private: Indicates that the format of sub-option value field is the value you
configure for the related sub-option.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Select the format of option 82 sub-option value field as TLV
(type-length-value) on port 1/0/1:
T2500G-10TS(config)#interface gigabitEthernet 1/0/1
T2500G-10TS(config-if)#ip dhcp snooping information format normal
13.8 ip dhcp snooping information remote-id
Description
The ip dhcp snooping information remote-id command is used to enable
and configure the customized sub-option Remote ID for the Option 82. To
return to
default Remote ID for the Option 82, please use no ip dhcp snooping
information remote-id command.
Syntax
ip dhcp snooping information remote-id string
no ip dhcp snooping information remote-id
Parameter
string ——Enter the sub-option Remote ID, which contains 32 characters at
most.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
98