TP-Link T2500G-10TS - Access-List Policy Action

operations here include stream mirror, stream condition, QoS Remarking and
redirect.
Syntax
access-list policy name name
no access-list policy name
name
Parameter
name —— The Policy Name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Add a Policy named policy1:
T2500G-10TS(config)# access-list policy name policy1
28.12 access-list policy action
Description
The access-list policy action command is used to add ACLs and create
actions for the policy. To set the detailed configuration of actions for a policy,
please use access-list policy action command to access Action
Configuration Mode. To delete the corresponding actions, please use no
access-list policy action command.
Syntax
access-list policy action policy-name acl-id
no access-list policy action
policy-name acl-id
Parameter
policy-name —— The Policy Name, ranging from 1 to 16 characters.
acl-id —— The ID of the ACL to which the above policy is applied.
Command Mode
Global Configuration Mode
217