TP-Link T2500G-10TS - Logon by SSH

1.1.3 Logon by SSH
To log on by SSH, a Putty client software is recommended. There are two authentication modes
to set up an SSH connection:
Password Authentication Mode: It requires username and password, which are both admin by
default.
Key Authentication Mode: It requires a public key for the switch and a private key for the SSH
client software. You can generate the public key and the private key through Putty Key
Generator.
Note:
Before SSH login, please follow the steps shown in Figure 1-12 to enable the SSH function
through Telnet connection.
Figure 1-13 Enable SSH function
10