TP-Link T2500G-10TS - Holiday(Global); Access-List Create

T2500G-10TS(config-time-range)#holiday
28.5 holiday(global)
Description
The holiday command is used to define a holiday. To delete the
corresponding holiday, please use no holiday command.
Syntax
holiday name start-date start-date end-date end-date
no holiday
Parameter
name —— The holiday name, ranging from 1 to 16 characters.
start-date —— The start date of the holiday, in the format of MM/DD, for
instance, 05/01.
end-date —— The end date of the holiday, in the format of MM/DD, for
instance, 05/03.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Define National Day, configuring the start date as October 1st, and the end
date as October 3rd:
T2500G-10TS(config)#holiday nationalday start-date 10/01 end-date
10/03
28.6 access-list create
Description
The access-list create command is used to create standard-IP ACL and
extend-IP ACL.
Syntax
access-list create access-list-num
211