TP-Link T2500G-10TS - Show Access-List Policy; Show Access-List Bind

Privilege Requirement
None.
Example
Display the status of ACL hardware entry table:
T2500G-10TS(config)# show access-list status
28.21 show access-list policy
Description
The show access-list policy command is used to display the information of a
specified policy.
Syntax
show access-list policy name
Parameter
name —— The Policy Name desired to show.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the information of a policy named policy1:
T2500G-10TS(config)# show access-list policy policy1
28.22 show access-list bind
Description
The show access-list bind command is used to display the configuration of
Policy bind.
Syntax
show access-list bind
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
223