TP-Link T2500G-10TS - Ipv6 Mld Snooping Report-Suppression; Ipv6 Mld Snooping Unknown-Filter

32.4 ipv6 mld snooping report-suppression
Description
The ipv6 mld snooping report-suppression command is used to enable the
Report message suppression function. By default, it is enabled. To disable
this function, please use no ipv6 mld snooping report-suppression
command.
Syntax
ipv6 mld snooping report-suppression
no ipv6 mld snooping report-suppression
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Disable Report message suppression function:
T2500G-10TS(config)# no ipv6 mld snooping report-suppression
32.5 ipv6 mld snooping unknown-filter
Description
The ipv6 mld snooping unknown-filter command is used to enable the
unknown multicast packets filter function. To disable this function, please use
no ipv6 mld snooping unknown-filter command. By default, it is disabled.
Syntax
ipv6 mld snooping unknown-filter
no ipv6 mld snooping unknown-filter
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
269