TP-Link T2500G-10TS - Ipv6 Mld Snooping Multicast-Vlan

no ipv6 mld snooping last-listener query-count
Parameter
num —— Specify the numbers of Specific Query Message to be sent, ranging
from 1 to 7.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the number of Specific Query Message to 3:
T2500G-10TS(config)# ipv6 mld snooping last-listener query-count 3
32.8 ipv6 mld snooping multicast-vlan
Description
The ipv6 mld snooping multicast-vlan command is used to enable the
multicast VLAN function. To disable this function, please use no ipv6 mld
snooping multicast-vlan command. By default it is disabled.
Syntax
ipv6 mld snooping multicast-vlan
no ipv6 mld snooping multicast-vlan
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable multicast VLAN:
T2500G-10TS(config)# ipv6 mld snooping multicast-vlan
271