Syntax
server
ip-address
no server
ip-address
Parameter
ip-address
—— Specify the server’s IP address.
Command Mode
Server Group Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Create the RADIUS server 1.1.1.1 to RADIUS server group “radius1”:
T2500G-10TS(config)# aaa group radius radius1
T2500G-10TS(aaa-group)# server 1.1.1.1
35.10 show aaa group
Description
This show aaa group command is used to display the summary information
of the AAA groups. All the servers in this group will be listed if you specify the
group name.
Syntax
show aaa group [
group-name
]
Parameter
group-name
—— Specify the server group name.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the information of all the server groups:
T2500G-10TS(config)# show aaa group
330
To Next Page
Loading...
