TP-Link T2500G-10TS - Show Running-Config

Example
Display the system boot configuration information:
T2500G-10TS# show boot
21.21 show running-config
Description
The show running-config command is used to display the current operating
configurations of the system or of a specified port.
Syntax
show running-config [ all ]
Parameter
all —— Displays all the current operating configurations. Without this option,
only the configurations that differ from the default value will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the configurations that differ from the default value:
T2500G-10TS# show running-config
21.22 show running-config |
Description
The show running-config | command is used to filter the output information
with the keyword you specify. “|” is a separator indicating the information will
be filtered.
Syntax
show running-config | { [exclude exclude-keyword ] [ include
include-keyword } ]
Parameter
exclude-keyword —— The operating configuration excluding this keyword wil
be displayed.
168