TP-Link T2500G-10TS - 12.4 802.1 X

23.15 show bandwidth
Description
The show bandwidth command is used to display the bandwidth-limit
information of Ethernet ports.
Syntax
show bandwidth [ interface gigabitEthernet port-list ]
Parameter
port-list ——The list of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the bandwidth-limit information of port 1/0/4:
T2500G-10TS(config)# show bandwidth interface gigabitEthernet 1/0/4
188