TP-Link T2500G-10TS - Show Ipv6 Mld Snooping Filter; Show Ipv6 Mld Snooping Interface

static —— Display static groups.
vlan-id ——The VLAN ID selected to display, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display all of the multicast groups:
T2500G-10TS(config)# show ipv6 mld snooping group
32.30 show ipv6 mld snooping filter
Description
The show ipv6 mld snooping filter command is used to display the filter
entries.
Syntax
show ipv6 mld snooping filter
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the filter entries:
T2500G-10TS(config)# show ipv6 mld snooping filter
32.31 show ipv6 mld snooping interface
Description
The show ipv6 mld snooping interface command is used to display the
interface information of MLD Snooping.
Syntax
show ipv6 mld snooping interface [ gigabitEthernet port ]
285