TP-Link T2500G-10TS - Show Ipv6 Mld Snooping Static-Mcast; Show Ipv6 Mld Snooping Group

Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display all of the VLAN information:
T2500G-10TS(config)# show ipv6 mld snooping vlan
32.28 show ipv6 mld snooping static-mcast
Description
The show ipv6 mld snooping static-mcast command is used to display the
static multicast groups configured by users.
Syntax
show ipv6 mld snooping static-mcast
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display static multicast groups:
T2500G-10TS(config)# show ipv6 mld snooping static-mcast
32.29 show ipv6 mld snooping group
Description
The show ipv6 mld snooping group command is used to display multicast
groups.
Syntax
show ipv6 mld snooping group [ dynamic | static ][ vlan vlan-id ]
Parameter
dynamic —— Display dynamic groups.
284