TP-Link T2500G-10TS - Login Authentication(Console)

Privilege Requirement
Only Admin level users have access to these commands.
Example
Enter the Console port configuration mode and configure the console port 0:
T2500G-10TS(config)#line console 0
35.18 login authentication(console)
Description
The login authentication command is used to apply the login authentication
method list to the console port. To restore to the default authentication
method list, please use the no login authentication command.
Syntax
login authentication { method-list }
no login authentication
Parameter
method-list —— Specify the login method list on the console port. It is
“default” by default, which contains the method “local”.
Command Mode
Line Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the login authentication method list on the console port as “list1”:
T2500G-10TS(config)# line console 0
T2500G-10TS(config-line)# login authentication list1
336