TP-Link T2500G-10TS - Show User Account-List; Show User Configuration

Example
Disable the Telnet function:
T2500G-10TS(config)# telnet disable
11.12 show user account-list
Description
The show user account-list command is used to display the information of
the current users.
Syntax
show user account-list
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the information of the current users:
T2500G-10TS(config)# show user account-list
11.13 show user configuration
Description
The show user configuration command is used to display the security
configuration information of the users, including access-control, max-number
and the idle-timeout, etc.
Syntax
show user configuration
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
81