TP-Link T2500G-10TS - Show Aaa Accounting; Line Console

35.16 show aaa accounting
Description
This show aaa accounting command is used to display the summary
information of the accounting metheod list.
Syntax
show aaa accounting [ dot1x ]
Parameter
dot1x —— Specify the method list type.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the information of the default 802.1X accounting method list:
T2500G-10TS(config)# show aaa accounting
35.17 line console
Description
The line console command is used to enter the Line Configuration Mode
configure the console port to which you want to apply the authentication list.
Syntax
line console { linenum }
Parameter
linenum —— The number of users allowed to login through console port. Its
value is 0 in general, for the reason that console input is only active on one
console port at a time.
Command Mode
Global Configuration Mode
335