TP-Link T2500G-10TS - Show Port Isolation Interface

26.2 show port isolation interface
Description
The show port isolation interface command is used to display the forward
port list of a port.
Syntax
show port isolation interface [ gigabitEthernet port ]
Parameter
port —— The number of Ethernet port you want to show its forward port list,
in the format of 1/0/2.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the forward-list of port 1/0/2:
T2500G-10TS# show port isolation interface gigabitEthernet 1/0/2
Display the forward-list of all Ethernet ports:
T2500G-10TS# show port isolation interface
201