TP-Link T2500G-10TS - Aaa Authentication Dot1 X Default; Aaa Accounting Dot1 X Default

35.13 aaa authentication dot1x default
Description
This aaa authentication dot1x default command is used to configure an
802.1X authentication method list. A method list describes the authentication
methods for users’ login in 802.1X. To delete the default authentication
method list, please use the no aaa authentication dot1x default command.
Syntax
aaa authentication dot1x default { method }
no aaa authentication dot1x default
Parameter
method —— Specify the method name. Only RADIUS server group is
supported, and the default method is server group “radius”.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the default 802.1X authentication method as “radius1”:
T2500G-10TS(config)# aaa authentication dot1x default radius1
35.14 aaa accounting dot1x default
Description
This aaa accounting dot1x default command is used to configure an 802.1X
accounting method list. To delete the default accounting method list, please
use the no aaa accounting dot1x default command.
Syntax
aaa accounting dot1x default { method }
no aaa accounting dot1x default
333