TP-Link T2500G-10TS - Show Mac Address-Table Max-Mac-Count

Syntax
show mac address-table aging-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the Aging Time of the MAC address:
T2500G-10TS(config)# show mac address-table aging-time
20.8 show mac address-table max-mac-count
Description
The show mac address-table max-mac-count interface gigabitEthernet
command is used to display the security configuration of all ports or the
specified port.
Syntax
show mac address-table max-mac-count interface gigabitEthernet [ port ]
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the security configuration of all ports:
T2500G-10TS(config)# show mac address-table max-mac-count interface
gigabitEthernet
Display the security configuration of port 1/0/1:
T2500G-10TS(config)# show mac address-table max-mac-count interface
gigabitEthernet 1/0/1
150