TP-Link T2500G-10TS - Show Etherchannel Load-Balance; Show Lacp

Example
Display the detailed information of EtherChannel Group 1:
T2500G-10TS(config)# show etherchannel 1 detail
10.6 show etherchannel load-balance
Description
The show etherchannel load-balance command is used to display the
Aggregate Arithmetic of LAG.
Syntax
show etherchannel load-balance
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the Aggregate Arithmetic of LAG:
T2500G-10TS(config)# show etherchannel load-balance
10.7 show lacp
Description
The show lacp command is used to display the LACP information for a
specified EtherChannel Group.
Syntax
show lacp [ channel-group-num ] { internal | neighbor }
Parameter
channel-group-num —— The EtherChannel Group number, ranging from 1 to
14. By default, it is empty, and will display the information of all LACP groups.
internal —— The internal LACP information.
neighbor —— The neighbor LACP information.
69