TP-Link T2500G-10TS - Mac Access-List

Parameter
access-list-num ——ACL ID, ranging from 100 to 299. The ID range of
Standard-IP ACL range is 100-199 and the Extend-IP ACL is 200-299.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a standard-IP ACL whose ID is 123:
T2500G-10TS(config)# access-list create 123
28.7 mac access-list
Description
The mac access-list command is used to create MAC ACL. To set the
detailed configurations for a specified MAC ACL, please use mac access-list
command to access Mac Access-list Configuration Mode. To delete the MAC
ACL, please use no mac access-list.
Syntax
mac access-list access-list-num
no mac access-list
access-list-num
Parameter
access-list-num —— ACL ID, ranging from 0 to 99.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create a MAC ACL whose ID is 23:
T2500G-10TS(config)# mac access-list 23
212