0. “
string
”
is
the shared key for the switch and the authentication servers to
exchange messages which contains 31 characters at most. The question
marks and spaces are not allowed. “
encrypted-string
” is a symmetric
encrypted key with a fixed length, which you can copy from another switch’s
configuration file. The key or encrypted-key you configured here will be
displayed in the encrypted form. Always configure the key as the last item of
this command.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
The TACACS+ servers you configured are added in the server group “tacacs”
by default.
Example
Configure a TACACS+ server with the IP address as 1.1.1.1, TCP port as 1500,
timeout as 6 seconds, and the unencrypted key string as 12345.
T2500G-10TS(config)# tacacs-server host 1.1.1.1 port 1500 timeout 6 key
12345
35.5 show tacacs-server
Description
This show tacacs-server command is used to display the summary
information of the TACACS+ servers.
Syntax
show tacacs-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
326
To Next Page
Loading...
