TP-Link T2500G-10TS - Show Ipv6 Mld Snooping; Show Ipv6 Mld Snooping Vlan

Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Clear the statistics of the MLD packets:
T2500G-10TS(config)# clear ipv6 mld snooping statistics
32.26 show ipv6 mld snooping
Description
The show ipv6 mld snooping command is used to display the global
configuration of MLD Snooping.
Syntax
show ipv6 mld snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of MLD Snooping:
T2500G-10TS(config)# show ipv6 mld snooping
32.27 show ipv6 mld snooping vlan
Description
The show ipv6 mld snooping vlan command is used to display VLAN
information of MLD Snooping.
Syntax
show ipv6 mld snooping vlan [ vlan-id ]
Parameter
vlan-id —— The VLAN ID selected to display, ranging from 1 to 4094.
283