TP-Link T2500G-10TS - Show Radius-Server

encrypted key with a fixed length, which you can copy from another switch’s
configuration file. The key or encrypted-key you configured here will be
displayed in the encrypted form. Always configure the key as the last item of
this command.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
The RADIUS servers you configured are added in the server group “radius” by
default.
Example
Configure a RADIUS server with the IP address as 1.1.1.1, authentication port
as 1200, timeout as 6 seconds, retransmit times as 3, and the unencrypted
key string as 12345.
T2500G-10TS (config)# radius-server host 1.1.1.1 auth-port 1200 timeout
6 retransmit 3 key 12345
35.7 show radius-server
Description
This show radius-server command is used to display the summary
information of the RADIUS servers.
Syntax
show radius-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the information of all the RADIUS servers:
T2500G-10TS(config)# show radius-server
328