TP-Link T2500G-10TS - Ip Dhcp Relay Information Format; Ip Dhcp Relay Information Circuit-ID

36.4 ip dhcp relay information format
Description
The ip dhcp relay information format command is used to select the format
of option 82 sub-option value field. To restore to the default option, please
use no ip dhcp relay information format command.
Syntax
ip dhcp relay information format { normal | private }
no ip dhcp relay information format
Parameter
normal | private —— The format type of option 82 sub-option value field.
normal: Indicates that the format of sub-option value field is TLV
(type-length-value).
private: Indicates that the format of sub-option value field is the value you
configure for the related sub-option.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Select the format of option 82 sub-option value field as TLV
(type-length-value):
T2500G-10TS (config)#ip dhcp relay information format normal
36.5 ip dhcp relay information circuit-id
Description
The ip dhcp relay information circuit-id command is used to specify the
custom circuit ID when option 82 customization is enabled. To clear the
circuit ID, please use no ip dhcp relay information circuit-id command.
Syntax
ip dhcp relay information circuit-id circuitID
no ip dhcp relay information circuit-id
346