TP-Link T2500G-10TS - Show Ip Igmp Snooping; Show Ip Igmp Snooping Interface

31.19 show ip igmp snooping
Description
The show ip igmp snooping command is used to display the global
configuration of IGMP snooping.
Syntax
show ip igmp snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of IGMP:
T2500G-10TS# show ip igmp snooping
31.20 show ip igmp snooping interface
Description
The show ip igmp snooping interface command is used to display the port
configuration of IGMP snooping.
Syntax
show ip igmp snooping interface [ gigabitEthernet [ port | port-list ] ]
{ basic-config | filter | packet-stat }
Parameter
port | port-list —— The Ethernet port number(s). If not specified, the
configuration of all ports is displayed.
basic-config | filter | packet-stat —— The related configuration information
selected to display.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
263